Water Rights Texas

Home › Before you drill, buy, or plug a Texas water well

Checklist

Before you drill, buy, or plug a Texas water well

Four practical checklists for Texas landowners: drilling a new well, buying land with water, dealing with an old well, and what to do when your well runs low.

Last updated Nov 17, 2026. By Ryan Trammell, Texas Hill Country. Sources are listed at the end of the page.

This is general information, not legal advice. Water law turns on the details. For your own land, talk to a Texas water lawyer, your groundwater district, or TCEQ. Read the full disclaimer.

Before you drill a new well

A new well is one of the biggest checks a rural landowner writes, and most of the headaches come from skipping a phone call at the start. The order below is the order that saves money: rules first, then the driller, then the paperwork you'll want years from now when you sell.

  1. Find your groundwater district. Use the TWDB district pages or the Texas Alliance of Groundwater Districts index linked from them. TWDB If you're inside a district, its rules on permits, spacing, and registration apply.
  2. Ask if your well is exempt. State law requires districts to exempt a well used only for a household or livestock or poultry if it sits on more than 10 acres and can't produce more than 25,000 gallons a day. Exempt wells still must be registered with the district. Water Code §36.117
  3. Ask about spacing. A district may apply its spacing rules even to exempt wells. Water Code §36.117(f)
  4. Hire a licensed driller. TDLR says a license is required to drill a water well in Texas and to install a pump. TDLR Texas law also lets landowners drill or plug wells on their own property, with reporting duties. TDLR
  5. Get the well log. The driller must file the well log with the district. Water Code §36.117(i) Since 2003, Texas well reports are filed electronically and kept by TWDB. TWDB Keep your own copy with your property papers.
  6. Look at your neighbors' wells. TWDB's Groundwater Data Viewer shows reported wells near an address, including depth where reported. TWDB Remember TWDB warns those locations aren't verified. TWDB

Buying land with a well, a creek, or a stock tank

Real estate listings love to say "great water." Ask what that means on paper. Groundwater comes with the land as property, but a creek doesn't, and a well that was never registered or a water right that sat unused can be a problem you inherit. These steps take an afternoon and cost almost nothing.

  1. Pull the well report. For wells drilled since 2003, search TWDB's drillers reports; for older wells, try TCEQ's Water Well Report Viewer. TWDB
  2. Ask the seller if the well is registered with the groundwater district, and whether it has a permit or is exempt. Water Code §36.117(h)
  3. Check for a surface water right. Look up the property on TCEQ's Surface Water Rights Viewer. TCEQ If a water right comes with the land, TCEQ asks the new owner to file a Change of Ownership Form (TCEQ-10204) with the deed and a $100 fee. TCEQ
  4. Don't assume creek access means creek rights. Creek water belongs to the state; without a permit you're generally limited to exempt domestic and livestock use. TCEQ See the surface water guide.
  5. Ask whether a right has gone unused. A water right willfully abandoned for three straight years can be forfeited. Water Code §11.030
  6. Walk the land for old wells. TDLR tells landowners to look for casing pipe sticking up, a hole with no visible bottom, or an old windmill with missing blades. TDLR

Old, abandoned, or broken wells

An open or rotting well is a straight pipe from the surface to the aquifer. Runoff, fertilizer and animal waste can go right down it, and an uncovered hole is a danger to kids, livestock and wildlife. Texas puts the duty to deal with it on the landowner, with a clear deadline.

  • What counts. Under the Occupations Code, an "abandoned" well is one not in use, and a "deteriorated" well is one likely to cause pollution because of its condition. Occ. Code §1901.255
  • The deadline. Within 180 days of learning about an abandoned or deteriorated well, the landowner or person who has it must have it plugged or capped under state standards. Occ. Code §1901.255 TDLR says a deteriorated well must be plugged, and an abandoned well must be capped or plugged. 16 TAC §76.72
  • Who can do it. You can hire a licensed driller or pump installer, or plug a well on your own property by following TDLR's plugging specifications. TDLR TDLR specs
  • The paperwork. A plugging report is due within 30 days of plugging, to TDLR and, if you're in one, to your groundwater district. Occ. Code §1901.255
  • Capping instead. TDLR says a cap must keep out surface pollution, hold at least 400 pounds, and not be easy to remove by hand. TDLR TDLR also suggests a locking well cap or sanitary well seal, not just a cover. TDLR

When your well starts running low

This is the call nobody wants to make. In a long drought, water levels in many Texas aquifers drop, and a shallow well can quit before a deeper one does. Here is a calm order of operations.

  1. Check the aquifer, not just your pump. TWDB and its partners run automatic water-level recorders in observation wells around the state, and you can look up real-time levels in wells near you. TWDB If nearby levels are falling too, it's likely the aquifer, not a broken pump.
  2. Pull your well report. It tells you how deep the well is and, often, where the pump was set. TWDB That's the first thing a pump installer will ask.
  3. Call a licensed pump installer. Lowering a pump or replacing equipment is licensed work in Texas. TDLR
  4. Call your groundwater district. Deepening a well or drilling a replacement may need district approval, and districts set drought rules under their management plans. TWDB ch. 36
  5. Stretch what you have. A rain tank off the barn or house roof can carry livestock and garden water through dry spells. See our rainwater guide for sizing and tax breaks.

I started this site partly because my own parents in Uvalde County have had their well go dry more than once in the last couple of years. It happens to careful people, and it helps to know who to call before it does.

Keep reading

Sources for this page

  1. Texas Water Code, Chapter 36: §36.117
  2. Texas Water Code, Chapter 11: §11.030
  3. Texas Occupations Code §1901.255: Plugging water wells
  4. 16 Tex. Admin. Code §76.72
  5. TDLR: Water Well Drillers and Pump Installers
  6. TDLR: Technical Guidance on Abandoned or Deteriorated Water Wells
  7. TDLR: Well plugging specifications
  8. TDLR consumer sheet: Water well drillers and pump installers
  9. TDLR, Mar 31, 2025: Watch out for abandoned or deteriorated water wells
  10. TWDB: Locating a Water Well Report
  11. TWDB: Groundwater Data and Well Reports
  12. TWDB: Groundwater Conservation Districts
  13. TWDB: Groundwater and Drought
  14. TCEQ: Water Rights and Water Use During Drought
  15. TCEQ: Surface water rights applications and forms